Xtracycle FlightDeck LT1 Version 2.0 (No Superhooks)
Looking to upgrade your original FreeRadical, Radish or Big Dummy to carry kiddos in Yepps seats or with a Hooptie? This is the deck for you. The LT1 v.2 FlightDeck is a super sturdy, waterproof, UV proof, scratch and ding resistant plastic deck that sits atop the V-racks and provides a surface for carrying cargo or passengers. It is made from 100% post-consumer high density polyethylene (HDPE), which reduces our ecological impact and keeps perfectly good plastic out of the waste stream. This deck requires a set of SuperHooks (sold separately) to attach the LT1 v.2 FlightDeck to your V-racks, ensuring a secure connection. Add a MagicCarpet (full or mini) for a padded cushion to increase rear passenger’s comfort.
Superhooks can be found here.
FlightDeck with Yepp EZ Fit ports. DOES NOT INCLUDE HARDWARE! One set of Superhooks is required to attach. When using the deck with Yepp seat(s) an extra set of SuperHooks is advised.
This is the LT1 platform with Yepp cutouts. Compatible pre-2015 Xtracycles.
What Is This Not Compatible With:
This deck is NOT compatible with 2016 EdgeRunners, Leaps, Cargo Nodes, Yuba cargo bikes, Kona cargo bikes, or the Trek Transport.
Installation Notes:
Not sure if this is the deck your bike has? Check out the FlightDeck Identification Guide to verify.
If you intend to install an LT2 Hooptie on a bike with a wooden SnapDeck or metal deck – like those found on the Pre-2016 EdgeRunner, FreeRadical, Cargo Joe, Radish, or Surly Big Dummy – this deck with the appropriate number of SuperHooks and Hooptie Retrofit Kit is required.
Do not use SnapHooks with this deck. The LT1 v.2 FlightDeck does NOT require Yepp adapters as the Yepp seat secures to a hole that must be cut into the deck.
This above picture shows the deck with these rectangular holes cut out but the deck arrives as a solid deck, with no pre-cut holes.
If you will be installing a Yepp Maxi seat on the deck, use two sets of SuperHooks for a total of 8 hooks.
